Snow Plow Specs:
Features:
Mount this light-weight, user-friendly plow to your front or rear-end 2" hitch and let the 82" blade do the work. All you need to do is drive. Plow is fixed in a straight ahead position, blade automatically raises and lowers when needed.
Tech Tip:
Product is designed to fit the 2 in. receiver on the back of your vehicle.
More Information >Snow Plow Specs:
Features:
Mount this light-weight, user-friendly plow to your front or rear-end 2" hitch and let the 82" blade do the work. All you need to do is drive. Plow is fixed in a straight ahead position, blade automatically raises and lowers when needed.
Tech Tip:
Product is designed to fit the 2 in. receiver on the back of your vehicle.
More Information >Videos
for Snow Plow
Help Articles
for Snow Plow
Expert Answers
for Snow Plow
If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for installation. The Detail K2 Elite Snowplow for 2" Hitches part #K2AVAL8826ELT for example is a great…
view full answer...I checked with Curt and I can confirm that the Curt Front Mount Trailer Hitch item #C22NR does fit the 2022 Chevrolet Silverado 1500 LT with the diesel engine. The only picture we have is from the installation instructions and I have attached it…
view full answer...The usable pin length for both pins that come with the Fastway Hitch Lock and Adjustment Pin Lock Set #FA86-00-4200 measures 3-5/8" (see attached). If this is too short for your 2023 Toyota Tundra please let me know what length…
view full answer...To attach a SnowBear plow to a front hitch like the Curt #C31089 that fits your 2019 Ram 2500 what you need is the hitch adapter part #SB324-120. This will enable your current plow to attach to a hitch so you'd be set with it and…
view full answer...Hey Brad, thanks for reaching out! What pin box number do you currently have installed on your 2021 Grand Design Reflection 31MB? You should find a sticker with a number like "1621" or even a serial number and the…
view full answer...So the number GH-8045AL you are seeing is the Gen-Y part number for our #GY58GR. So everything is okay with that. As far as the height and the mounting holes it can vary so much from camper and vehicle that I always say it is best to just ensure…
view full answer...The Electric Jack w/ Footplate is offered both with the plug part #EJ-3527-BBX and without the plug part #EJ-3520-BBX. Therefore, if you wanted to go with the model that has the plug and just cut that off you would indeed just run the wire to the…
view full answer...I attached a picture that shows the install instructions for the Caster Kit for SnowBear Snowplows #SB324-126 that you referenced.
view full answer...Hey Bruce, while the Gen-Y fifth wheel to gooseneck adapter part #GY58GR doesn't provide additional turning clearance the tapered nose of your 2022 Grand Design Solitude 280RK with the "longer" short…
view full answer...The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…
view full answer...We have that size (see link), but none of the tires are radial. They are all bias ply as that is the common construction for the LT tires. The closest tire size that is radial would be the 235/80R16 like part #TTWTRTM2358016E. This size has a…
view full answer...Both Firestone Ride-Rite kits are good options for your 2024 Ford F-250 Super Duty 4WD, but I like to recommend the 7,500 lb #F95FV rating over the 5,000 lb Rating #F35FV simply because it means the air bags can be used for the same application but…
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
Ordered the part on Saturday and had it by Wednesday. $35-$75 cheaper than I could find anywhere else. I plan on using this site again.
Mark
Shalimar, FL